CommView for WiFi is a special edition of CommView designed for capturing and analyzing network packets on wireless 802.11a/b/g networks. CommView for WiFi gathers information from the wireless adapter and decodes the analyzed data. With CommView for WiFi you can see the list of network connections and vital IP statistics and examine individual packets. Packets can be decrypted utilizing user-defined WEP or WPA-PSK keys and are decoded down to the lowest layer, with full analysis of the most widespread protocols. Full access to raw data is also provided. Captured packets can be saved to log files for future analysis. A flexible system of filters makes it possible to drop unnecessary packets or capture the essential packets. Configurable alarms can notify the user about important events such as suspicious packets, high bandwidth utilization, or unknown addresses. Packet Generator utility is available for editing and sending packets via your wireless network adapter. CommView for WiFi features full decoding of the following protocols: ARP, BCAST, BGP, BMP, CDP, DAYTIME, DDNS, DHCP, DIAG, DNS, EIGRP, FTP, G.723, GRE, H.225, H.261, H.263, H.323, HTTP, HTTPS, ICMP, ICQ, IGMP, IGRP, IMAP, IPsec, IPv4, IPv6, IPX, HSRP, LDAP, MS SQL, NCP, NDS, NetBIOS, NFS, NLSP, NNTP, NTP, OSPF, POP3, PPP, PPPoE, RARP, RADIUS, RDP, RIP, RIPX, RMCP, RPC, RSVP, RTP, RTCP, RTSP, SAP, SER, SIP, SMB, SMTP, SNA, SNMP, SNTP, SOCKS, SPX, SSH, TCP, TELNET, TFTP, TIME, TLS, UDP, VTP, WAP, WDOG, YMSG, 802.1Q, 802.1X. CommView for WiFi is a helpful tool for WLAN administrators, security professionals, network programmers, or anyone who wants to see the full picture of their WLAN traffic. This application runs under Windows 2000/XP/2003 and requires a compatible wireless network adapter.