The Radar Screensaver is a beatiful, entertaining and educational screen saving utility. It allows to be easily configured in many ways to provide you many hours of enjoying with a hi-tech animation. You will find a main circular display with famous rotating beam. It will expose the flying objects which will be reflected as blips over the display. The four sector displays will show a very dynamic picture of radio beam in four quadrants. The degree of simulation is very high, so you will see not only noises from terrain surface and clouds, but even geometric distortions caused by physical effects. Each detected object will be recognized with a Satellite-Powered Identification System (SPIDES): when flying object is exposed by radio beam, the reconnaissance satellite will take its photo and send it to computer at radar observation post. There it will be compared with known types of aircrafts and other flying objects (by the way, there are more than 60 flying object types supported) and finally recognized. You will see this process and final photo of recognized object type. Later, on each beam sweep, the detected object will be updated with path tracking line to allow the operator to view from where and to where the object flies. For those purposes, each object will be supplied with a marker - small rectangle with azimuth, speed, course and distance information. The same information will be placed into the detection logs - two columns of running digits at both sides of your display. You will be able to configure a lot of settings, and change the colors of all the animation elements. The Radar Screensaver supports multi-monitor configurations, so if you have more than one monitor connected to your PC, you will be able to turn your workplace into something like observation post. Another exciting feature, making this screensaver very useful, is ability to leave an on-screen messages. These will be shown after attempt to close the screensaver when you are away from your PC.